[DML] Re: need part number

[raynet@xxxx]

I found very close replacements at NAPA. The only modification I had
to do was to cut the circular portion at the bottom because they are
not designed to twist into the holes on the headliner panel like the
old ones. Other than that, they hold perfectly. I wish I had the
original part number from when I bought them, but unfortunatly because
they were so cheap I just thew out the reciept.

To see a rough drawing of the ones I got goto
http://24.10.99.77/images/linerclips.jpg

They should be able to match that up if you bring that to NAPA

Raymond McKay

delorean50-@xxxx wrote: 
original article:http://www.egroups.com/group/dmcnews/?start=4489
> could someone (james or DMC Joe) tell me the part number for the pins
> that keep the headliners up. someone earlier refered to them as "fir
> tree pins". I need a bunch of them. for the headliners AND the
door. 
> former owner used shims to keep thing together....dumb @$$!
> 
> Erik Geerdink
> 4512
>