[DML] Re: rear ground clearance
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: rear ground clearance



All factory DeLoreans have elevated front ends due to a last minute
production change. Forget about cutting springs, simply purchase the
re-calibrated lower springs from PJ Grady or DMC Houston.

DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>

----------
> From: MARK DAVIDSON <WMARKDAVIDSON@xxxx>
> 
> Can you tell me the correct ground clearance for the front and rear of
the
> car? I have read that the rear is 6.1 inches and 6.87 inches. I had new
> tires put on the car and was told by the installer that the car was an
inch
> low in the rear (5.8 inches). When you set in the drivers seat and look
at
> the rear view mirror you see more of the headlinner than the read window.
As
> this is my first D and I have not been around any before so I do not know
if
> this is "normal" From the outside the car looks like it is setting
> correctly. I have head stories about cutting the rear springs and moving
> them to the front etc. Any help would be appreciated.
> 
> mark





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated