[DML] MORE Accumlator replacment

["Dave Swingle" <dswingle@xxxx>]

One more thought - My comment about holding the back of the fitting from
above only pertains if you are replacing the hoses as well (I did). If you
are just changing the accumulator this will not be a problem.

dave

----- Original Message -----
From: Dave Swingle <dswingle@xxxx>
To: dmcnews submit <dmcnews@xxxxxxxxxxx>
Sent: Thursday, August 12, 1999 10:26 AM
Subject: re: Accumlator replacment (was need insight)


> Eric - Another comment on accumulator replacement - make sure you remove
the
> small tray at the back of the console, and then the plastic cover plate
> under that. That is where you can hold the back of the fuel line fitting
> while you detach it from underneath. If you don't do this you WILL kink
the
> fuel line. At that point, you'll realize that the line is run in-between
the
> frame and the body. Not a pretty thought.