[DML] Re: DML: Trim (To Paint or not to Paint)

[KayoOng@xxxx]

Raymond,

It takes a little patience and time to get the black trim to look like new.
All you have to do is to painted it black with Krylon Spray paint #1613 Semi 
Flat Black. First clean all the black areas to be painted. Prepare all 
areas to be painted such as fill nicks cracks etc. Make sure surfaces are 
smooth. Clean again. 

Next mask all areas not to get painted or over spray with masking tape and 
masking paper (newspaper works). Spray it careful then remove tape and 
protective masking paper after it is 70% dried. Let dry completely. That is 
all it is need to get the new look. 

All exterior black -- front and rear bumpers, rocker sides panels, windows 
trim, front windshield trim, louvers, engine cover, left and right rear 
engine to window panel, front air scoop, rear exhaust skirt, rear license 
plate frame, tail light assemblies and the front grill. These areas will 
require about 8 to 12 hours and 8 to 10 cans of spray paint.

You still have the interior areas such as the doors, front hood engine 
compartment and extras if you wish to take it farther.

Kayo Ong
#05508
Lic 9D NY

------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/group/dmcnews
http://www.eGroups.com - Simplifying group communications