[DML] Re: Replacing thermo time switch.

["therealdmcvegas" <dmcvegas@xxxxxxx>]

--- In dmcnews@xxxxxxxxxxxxxxx, "Adam 16683" <acprice1@xxxx> wrote:
> 
> 
> I want to change my thermotime switch soon. I havent taken it apart 
> yet so I dont know whats in there exactly. Do I need to remove the 
> screw adapter 102122 ? If I do remove this adapter should I replace 
> its washer seal 102011 ?  
> 
> Or do I just unscrew the sensor from the adapter, leaving the adapter 
> connected to the water pump? 
> 
> Should I reassamble any of these with teflon tape or some other 
> thread sealer?

First question: Why do you need to replace the Thermo Time Switch?
What troubleshooting has lead you to this? I only ask, in the interest
of saving you money, by avoiding unessisary replacement of parts.

Now, to answer your question.
No, you do not have to take the adaptor sleeve out of the pump
housing, if you don't disturb it. Yes, you'll need to replace those
sealing washers. Remember, it's the exact same sealing method as whats
been used on the fuel injectors. No, you won't need teflon tape, if
you've got new copper washers to seal everything.

Installation is as simple as it seems. Just screw everything in, and out.

-Robert
vin 6585 "X" - It's a snow day for work!








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/