[DML] Re: HELP: Angle Drive Installation

["billeg1983" <billeg1983@xxxxxxxxx>]

Thanks to all that replied - will check the angle drive for dummies 
section.

--- In dmcnews@xxxxxxxxxxxxxxx, "Dave Swingle" <swingle@xxxx> wrote:
> 
> 
> 1.  1.25"
> 
> 2. Take old one off. Put new one on. Keep it lubed.
> 
----
> Dave
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "billeg1983" <billeg1983@xxxx> 
wrote:
> > 
> > 
> > 1. Instructions for replacement angle drive state that the wheel 
> > spindle nut is a 32mm and angle drive is 1.25 (inch). What are 
the 
> > correct sizes (38mm socket and 1.50 open end)?

---
> > 
> > Thanks,
> > All suggestions are welcomed.
> > BillG1983
> > NYDCPA: 09-11-01








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/