>From the inside: Pull the top dress-up panel off. Pull off the connecting rods on the back of the lock unit. Slide clip off. Push lock out. It seems that there were a couple of different clips or mechanisms to secure the lock to the door skin, depending on your production range. But they are all basically the same-- some either slides over or screws down on the lock casing to secure it to the skin. --- gzapf <x86Daddy@xxxxxxxxxxxxx> wrote: > > > > I think my door lock's internals have failed... > peering into the lock > with a good flashlight, all of the bottom tumblers > are recessed > without being pushed down. I'm guessing a spring or > something has > broken? So I'm trying to remove them so I can > further look into it, > and probably take it to a locksmith... > > How does one remove that lock?! I couldn't find the > process in the > shop manual, but I may be blind. I have the updated > ignition-matched > locks in my earlier VIN car. > > Thanks, > --Greg > #2894 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/