Hi, I have just replaced both the diff seals in my maunal transmission, the problem i have is that on the adjustment side i marked the nut, counted the turns etc etc.... but while i had the adjustment nut out i washed it in solvent thus removing the black mark i put on it! It was one of those situations where i realised what i had done a second after it was in the solvent but that was to late. I looked very hard for left over marks and other ways to try identify where it had been but had no luck. I can get it within 1/2 a turn of where it used to be but not 100% accurate. Is there a way or procedure to measure the correct tension requiured. I am presuming that this is the adjustment for backlash in the diff. My appoligies if this is all spelt out in the workshop manual as i am on my way to the garage to consult it now. Cheers Nick -sydney10927 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/