Hi Gert... I ran into a similar problem last week with my car. Turns out the three cables running from the transmission to the diagnostic port were turned into a cheese fondue when they came in contact with the metal heat shield on the exhaust that runs around the back of the engine. Mmmmm...melted plastic. Good luck! Dave --- In dmcnews@xxxxxxxxxxxxxxx, "gert christensen" <ingegert@xxxx> wrote: > hey group > > After engine swap, today I put it back in the car. Everything works fine, except > the transmission > reverse is working , parking is ok, neutral is ok, 1st "hold" is ok, 2nd "hold" > is working and shift ok, but drive is total dead (just like neutral). Before the > engine swap, I have never had transmission problems. > > any suggestions ???????? > > gert win 2884 > denmark > > > [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/