RE: [DML] Hard starting (or no starting) issue resolved?

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Dan, You enriched the mixture screw so when you start the car the control
plunger in the distributor rises higher to feed the injectors. Re adjust
when hot to take out the swing in iidle if any and your set.
John Hervey




-----Original Message-----
From: Dani B [mailto:5n-@xxxxxxx]
Sent: Monday, September 06, 2004 5:59 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Hard starting (or no starting) issue resolved?


Today I had the chance to play around a little with the car. I
adjusted the distributor a little bit (CCW standing on drivers side)
and now the car starts fine as opposed to not starting at all without
starting spray. Why would this be? It idles a little faster but who
cares, my car starts easily! Dani B. 5003




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/