[DML] Re: Clutch replacement procedure

["ryanpwright" <yahoo1@xxxxxxxxxxxxxx>]

Thank you all for the advice.

I really underestimated this job. I didn't realize the tranny had to
come out. I suppose now is as good a time as ever to learn, though, so
I'll be digging into it this weekend. I figure with a three day
weekend I ought to be able to get it done, assuming nothing goes wrong
that forces me to wait for parts.

-Ryan

--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> wrote:
> You should also have a clutch alignment tool. It will make the
> reinstallation of the transmission MUCH easier. A floor jack would be
> nice too. That way you can let the trans down on it and use it to put
> it back in. A lot easier than trying to lift it up while on your back.
> Take the oil out of the trans so you don't spill it all over yourself.
> You can refill with fresh when you put it back in.
> While you have the trans out you may want to change some of the seals
> on it if they are leaking and replace the roll pin. When you get it
> all back together you should go over all the shifter adjustments and
> lubricate the linkage. Be careful, it is real easy to damage your
> fingers working with heavy parts. Don't force anything. If it doesn't
> come apart easily you may have missed removing a bolt so work slowly
> and carefuly.
> David Teitelbaum
> vin 10757 
> 
> 
> -- In dmcnews@xxxxxxxxxxxxxxx, "d_rex_2002" <rich@xxxx> wrote:
> > Ryan,
> >




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/