Re: [DML] 4th Angle Drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] 4th Angle Drive
- From: Soma576@xxxxxxx
- Date: Tue, 31 Aug 2004 21:19:30 EDT
In a message dated 8/29/04 7:29:04 PM Central Daylight Time,
videobob@xxxxxxxxxxx writes:
> This last unit was noticablly off center and wobbly.
> It lasted around the block, when I backed in the driveway it snapped.
>
> Is there a solution?
> - Videobob
> VIN#5278
>
Videobob,
your problems are not common and there is apparently a problem on your end
that needs to be resolved. i am surprised DMC Houston has been so helpful to
keep replacing them when there is obviously another problem. something is
definitely hanging up, causing extra stress on the whole system.
have you replaced the lower speedo cable with the updated shorter version?
have you installed the guide bracket that goes on the steering knuckle? have you
opened up your lambda counter to check for mashed up gears? maybe there is
a problem with your installation technique?
Don't blame the angle drive - if the drives really were THAT bad, you
wouldn't be the only one blowing them up. there is something on your side that isn't
right.
Andy
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN