[DML] Door and window alignment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Door and window alignment



Lots of questions from me today.

I finally realigned the pass window so it no longer jumps off of the 
track and I'm estatic about how it operates.  Except it now properly 
hits the window stop at the bottom of its travel causing the top 1/4" 
or so to stay above the window opening.  Is this the proper stop 
location and can I adjust it.  If you want to hang your arms out the 
window this would be uncomfortable.

Also, the pass door doesn't seem to be aligned properly.  The side 
stripe is at least a 1/4" low in the front even after I adjusted the 
strikers.  The door seems to be torqued but I doubt it is as the 
structural strength of those puppuies is pretty high.  My door seals 
are also pretty torn up as when the door closes the door frame will 
rub the seals pretty hard in the back T panel section.  Is there a 
good procedure to check and align the doors for proper closing?  
Anyone have a good cross-refernce for door seals?

Jeff
#10544




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated