[DML] Re: glove box
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: glove box
- From: "Matt Spittle" <supermatty@xxxxxxx>
- Date: Fri, 13 Aug 2004 00:57:27 -0000
This is the procedure I used to fix my glove box:
- Attach the 2 bolts & nuts that hold the bottom part of the latch,
LOOSELY to
the fiberglass.
- LOOSELY attach the upper portion of the latch with the single
phillips screw.
- With your glove box hinges SEMI-LOOSELY attached, go ahead and try
to close the glove box so that it latches. This will likely require
you manipulate moving the lid around as well as moving the upper
part of the lower latch (the part that attaches with the phillips
screw) with your hand. With your third hand, go ahead and squeeze
the latch release buttons together on the lid to facilitate getting
the damn thing to latch, period.
- If you're good, you've got it latched, and all of the fasteners
are loose.
- Tighten up the 2 bolts that hold the lower part of the latch.
This part of the adjustment is done.
- Open the lid again, and tighten the hinges so that the lid sits
well on the dash. This takes some eyeballing.
- Now the most critical part, adjusting the upper part of the lower
latch (where the phillips screw attaches). This seems to be the
difference between a box that latches shut and doesn't. You've
gotta move it up and down and all around, finding the sweet spot,
tightening it each time, until you find a magical position where you
can close the lid and it will latch.
-Reinstall passenger side kneepad. If you did all of the above
correctly, this will reinforce this area of the dash and it will
latch even better than while the kneepad was still not installed.
Hope it helps.
Matt
#1604
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN