Re: [DML] Horrible Idle problem

[Eric Itzel <eric@xxxxxxxxxxxxx>]

Hey Austin

Is you CO mixture adjustment screw (the allen headed one down in the hole
next to the fuel distributor) covered & sealed? If not, that's a nasty
little vacuum leak that'll mess with your system. I would check all of your
vacuum lines to make sure that you have no leaks.

What did it take to get your car running?

Eric Itzel
vin 4433

----- Original Message ----- 
From: "austinbrumley" <austinbrumley@xxxxxxxxxxxx>
Subject: [DML] Horrible Idle problem


> I just got my car running for the first time since i bought it. When
> we first fired it it ran like crap sputters, runs rich won't idle. I
> just put a new fuel distributor in from John Hervey. It runs better
> but still idles like crap and runs to rich. What else should i
> replace and where should my co adjustment & idle speed controls be
> set to?



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/