[DML] Continued: Disecting Air/Fuel Mixture Unit

["content22207" <brobertson@xxxxxxxxxxxx>]

I'm just doing this for the curiosity. Apparently there are no
exploded diagrams of an air/fuel mixture unit itself. Faced with a
choice between working on 1001 unfinished projects at the house or
disassembling a car part, I chose the path of least resistance
(reassembling it will be project number 1002).

My efforts are not for naught -- was contacted off List by someone
interested in attaching a sensor to his teeter totter shaft.
Unfortunately the "ball bearings" are in the way (are true ball
bearings -- two giant stainless steel balls). Might work if they were
replaced with something with a hole bored through it.

Jeff is of course welcome to buy all or part of this unit used from me.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, Michael Paine <mpaine@xxxx> wrote:
> All this talk of the screw - you are missing the forest and only
seeing the
> tree... If you can't get the screw in or out without removing the
> "teeter-totter" then how is his missing??? was is drilled out? Will
he have to
> tap a new set of threads?? Many questions... would it be simpler (if
not wiser)
> to buy a used assembly??
> 
> regards,
> 
> Michael
> vin 6067
> 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/