[DML] Hood "Edging strips"
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Hood "Edging strips"



Does anyone have any tricks with keeping those long plastic hood
"Edging strips" on? Mine keep on falling off every time I close the
hood or they will sag in some areas and stay on in others. These are
new, installed April. I used a hammer to tap them on so the
glue/cement or
whatevers in the middle would have good contact all around the edge of
the metal-thought with this method there would be no way for them to
fall off. Held out for a little while but not anymore. The glue or
whatever stuff in the center didn't quite work
to well...Any suggestions? Thanks -Dani B. 5003




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated