[DML] Head bolts and coolant
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Head bolts and coolant



Here is a question that I hate to ask because I'm afraid of the 
answer.  After installing new head gaskets, warming the engine, and 
proceeding to the retightening procedure I observed the following.  
When I loosened the head bolts on the drivers side (specifically the 
center 4) coolant seeped up the bolt passage and onto the top of the 
head.  Obviously my question is, "Is this normal for a DeLorean?"  
If the head bolts are open to a passage or are the DeLorean head 
bolt supposed to be blind holes?  All replies/suggestions are 
welcome!

Jeff




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated