Re: [DML] Stainless steel coolant resovoir

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

I also replaced my plastic header bottle with a S/S bottle and did not
like losing the ability to check the coolant level. My solution was to
add an overflow bottle so now I can see the level hot or cold. BTW the
S/S bottle did not kill your motor. You MUST have had some warning.
Were you watching your temperture gauge? You cannot see your plastic
bottle from the driver's seat!
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Elvis Nocita" <elvisnocita@xxxx> wrote:
> I would replace it with a new plastic reservoir.
> My stainless bottle went back to the basement.
> If you ever have a water leakage - the stainless bottle 
> won't tell you at all.
> A plastic bottle will !
> 
> There are also bottles out here with a low-water-switch
> that could be connected to the LAMBDA bulb in the dash.
> 
> I'm sure Toby Peterson can provide you with such a bottle.
> 
> Elvis & 6548...with new head gaskets because of a stainless bottle !
> 
> 
> 
> I am planning to replace my plastic coolant reservoir.  Should I
replace it
> with a stainless steel reservoir?
> 
> DMCH is out of stock.  Who else would have it?
> 
> Roland Smith
> Oakland, California
> VIN 6667




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/