Re: [DML] clutch

["Michael Paine" <mpaine@xxxxxxxxxxxxxxxx>]

you can do it yourself - you do not need a lift. A good set of Jack 
stands and a floor jack is all you need to get under the car. Here are 
the steps I took.

Remove the clutch line from the metal pipe - found on the top of the 
tranny if you are under the car.
Remove the metal pipe to the slave cyl
Remove the 2 bolts that hold the slave to the bell housing
remove slave.

reverse for install then bleed.

> I guess my question in regarding the replacing of the slave cylinder 
> for the clutch was, how do I replace it?  Do I need a lift?  Can I 
> replace it myself?  Can it be accessed from the top?  Do I need a 
> transmission guy to drop the trans?  Thanks for all your help.
> 
> joseph molino



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/