[DML] Bent lower strut mounts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Bent lower strut mounts



On my passenger door, my lower strut mount is bent about 25 degrees 
downward from horizontal.  Is there a way to fix this???  I was 
planning on removing the T-panel soon but it doesn't seem like this 
would give me any access to the mount.  I figure this problem arose 
due to the Lift-o-Mat struts being used on the car.  The fact that 
they have no damping feature must have really taken its toll.  The 
driver-side lower strut mount is bent as well, but more along the 
lines of 5-10 degrees downward.

Matt
#1604




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated