[DML] Re: mode switch.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: mode switch.
- From: "sweitzel_2000" <sweitzel@xxxxxxxxxx>
- Date: Wed, 19 May 2004 10:16:17 -0000
--- In dmcnews@xxxxxxxxxxxxxxx, "Brian Bross" <babross@xxxx> wrote:
> My mode switch is toast. I have acquired a new mode switch but the
> manuals I have show a method to replace the switch that is
> impossible. Does anyone have a reference for a method I could use
> with instructions to replace it? Thanks
I just had to pull my mode switch this evening to rebuild it. Two of
the three metal "runners" inside had come loose from the plastic
housing causing a short which made the AC compressor run in all
modes. My advice would be to bite the bullet and remove the center
console. It's really not that bad. I can remove my console in under
15 minutes now. Once that's out of the way, it's one screw left
holding the mode switch to the metal plate and then you can pull it
out from behind.
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN