[DML] Evap Case Seal Install
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Evap Case Seal Install



Here's a new on on me. And it seems there's a lot of activity at the 
moment fixing air conditioners so maybe someone figured it out. 

After swapping the evaporator (a job in itself!), everything is 
almost back together. Has anyone figured out a reasonable way to put 
back in place the rubber seal thing that goes around the tubes coming 
thru the front firewall? I've been wrestling with this darn thing for 
what seems like hours. There is just no room above it to manipulate 
the rubber in place around the metal ring, and if it's not sealed up 
it's an invitation to water leaks when driving in the rain. 

I don't thing putting it in place prior to the tubes is the answer 
because the process of putting the tubing thru would just knock it 
off. I run into cars all the time where this thing is loose, I think 
now I know why. 

Any other bright ideas out there?

Dave S




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated