[DML] Re: Auto to Manual
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Auto to Manual
- From: "Dave Swingle" <swingle@xxxxxxxxxxx>
- Date: Wed, 28 Apr 2004 03:39:42 -0000
It can certainly be done. You won't save any money.
The biggest obstacle is the frame - there is a slight difference in
the mounting of the shifter and unfortunately it's a welded part. The
shifter mount for the manual has a bigger hole and is mounted lower
in the frame. But anything can be unwelded and moved.
Front-to-rear....You need to repace the pedal box (where the
gas/brake/clutch pedal/clutch master cylinder mounts), hydraulic
reservoir, add the hydraulic line, replace the linkage, transmission,
transmission mounts, flywheel, add a clutch, pressure plate, release
bearing, clutch fork, pilot bearing, slave cylinder.
It would usually be a lot less hassle and much cheaper to sell the
car and buy what you want. I'm not sure about the console plate but
you'd at least need the shifter boot too.
I actually have most of the parts to do it out in the garage, and I'm
sure I could find a hunk of frame around here with the right mounting
plate in it. It would add up to quite a bit of money. Probably about
the same as fixing the auto trans.
Dave S
--- In dmcnews@xxxxxxxxxxxxxxx, "mydmc5898" <mydmc5898@xxxx> wrote:
> Hi, well my udaye on my car is that the tranny is gone. And being
> that I have very, very limited funs to fix something like the
> tranny, I'm limited in my options. So one question I have is has
> anyone done a converstion from an automatic transmission to a
> manual. I understand that the cost will be very high. But if anyone
> has done this plase email me at DeLorean170@xxxx And also what a
> cost would be to do so.
>
> Thanks,
> Darryl
> 5898
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN