[DML] Re: Inlet air manifold
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Inlet air manifold



Mr T
I bet you broke off the small and hard hose from the heater control. From 
behind the engine it goes into the left pontoon, right? Same thing happened to me 
and I haven't fixed it yet!

It appears that you didn't follow my advice to download and print the two 
articles from the Archives! There is an o-ring in the hole where the tube you 
mention goes through the lower air casing. In all probability you have nicked the 
0-ring and good luck fishing out the old one and replacing it with a new! 
Roger
Vin 1074

In a message dated 4/12/2004 3:38:56 PM Eastern Standard Time, 
dmcnews@xxxxxxxxxxxxxxx writes:
I found one 
vacum line in the back, alittle one and I cant find where It goes, 
but I dont think just that little thing could be causing me all 
these problems.

Mr. T.


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated