[DML] Re: Air Bleed Screw

["content22207" <brobertson@xxxxxxxxxxxx>]

1/4" inside diameter.

I recommend a self bleeder (attached permanently to the coolant
expansion tank). Is fast, easy, and 100% fool proof. You can make your
own, but note thread pattern in thermostat housing is BSPT, not NPT
(28 TPI, not 27). Or simply buy a kit from one of the vendors. 

I think vendors may use 5/16" hose to match the existing bleed line. 

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, benjamin strand
<benjamin_strand@xxxx> wrote:
> I'm planning on flushing the coolant system this Saturday.  I know I
need to hook a small hose from the air bleed screw into a bucket of
coolant.  I was wondering if someone knew the diameter of the vacuum
hose that attachs thereto? 
>  
> Thanks,
> Ben
> 04613
> 
> Do you Yahoo!?
> Yahoo! Mail - More reliable, more storage, less spam
> 
> [Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/