[DML] Hazard Switch

["EJ Chambers" <marmieej@xxxxxxxxx>]

I am about ready to take my DeLorean and attempt to get in inspected.
A minor issue that I am running into is my hazard light. When I press
it in, only the passenger side lights blink. I can press my turning
switch to turn the driver side lights on.

After looking at the wiring diagram and the technical manual, I
believe the problem lies within the hazard switch (or so I hope) and
the contacts for the driver side of the Delorean are dirty. If this is
not the case, the I am guessing the problem lies where the wiring line
from hazard switch splices into the wiring going to the driver side
turn lights.

Does this assessment sound correct to everyone or anyone? Has anyone
had the same or similar problems as I have described? If so, what was
the issue and/or fix? I would love to get some direction before just
taking a stab at the solution.

Thanks,
Ej
Vin 4475




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/