The bracket IS the dash in that area. The console merely frames it in padded vinyl. That's why Henry mentioned in Message #39530 that Grady sold him one already covered -- there are exposed bits (very little but they would be obvious if left bare metal). These pages from the Parts Manual sort of explain: http://www.pjgrady.com/partcat_detail.asp?m=92&t=Electrical%2F+Mechanical+Controls&ad=13 http://www.pjgrady.com/partcat_detail.asp?m=106&t=Dashboard%2F+Console&ad=20 Think of it like a Mason jar lid: assembled it looks like one integrated unit, but disassembled you can see that the outer piece merely wraps around the inner piece. Cutting a new radio opening is really not that difficult. Hundreds (thousands?) of other owners have already done it. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, ComposerZelgadis@xxxx wrote: > Question! Me = newbie. > > If I were to add, say, a Sony CD receiver, I'd have to cut the dash, correct? > Because the original Craig is approx. 1/2 DIN size. > > Fair enough. > > How then, exactly, would getting a new mounting bracket resolve the cutting > issue? If the opening in the dash is only 1/2 DIN size... then the dash would > still have to be cut, correct? And in turn, wouldn't that invalidate the > point of getting a new mounting bracket? > > Forgive my ignorance. Be gentle in respones. =D > > Regards, > William F. > > > [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/