[DML] Re: Sticking Idle

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

I have seen several cars that had either (or both) of the following:
The Quadrant link was worn on both ends causing a lot of play between
the  throttle spool and the throttle arm. The other condition was a
loose ball on the throttle spool where the quadrant link connects to
on the throttle spool. Rotate the throttle spool with your hand and
watch both ends of the quadrant link for play and check that the ball
is not rocking on the throttle spool. Remember if you try to remove
the  quadrant link to remove the little clips first (just like the
bigger ones on the struts).
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Elvis Nocita" <elvisnocita@xxxx> wrote:
> The microswitch is not being pushed correctly.
> It can be set very easy.
> 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/