Re: [DML] Permanate addition to engine block; where to tap a new hole?

[Jim Strickland <ihaveanaccount@xxxxxxxx>]

Don't know about the new hole, but you might be able to get out the
extractor by welding a small tab onto it to get it out.  

If you're careful, it shouldn't be a problem tacking something to the
steel.  The aluminum won't stick, and will dissipate heat very quickly
becuase of it's size.

Jim
1537

On Sun, 22 Feb 2004 19:04:43 -0000 "jmlaux83" <jmlaux83@xxxxxxxxx>
writes:
> I had a broken off screw from the air intake manifold to the engine 
> block. After some research I decided to use a screw extractor. I 
> made 
>



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/