RE: [DML] Re: Changing Coil

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Marcus:
I and I'm sure we understand your in Sweden. The MSD may be a little to much
if the wires aren't changed. It's normally rated at .7 ohms and coupled with
our resistor on the rear fire wall is appx 1.7 ohms. Rated out put is 45,000
volts. If you measure the Bosch standard coil what ever it reads it has less
primary windings and it would be a lower out put that the 7mm wires will
handle fine. Should be rated about 12,000 volts out put. I would use the
Bosch again if not changing the wires or they will break down faster or leak
to ground.
John Hervey
www.specialTauto.com



-----Original Message-----
From: giesel [mailto:marcus@xxxxxxxxxxx]
Sent: Tuesday, February 10, 2004 2:44 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Changing Coil


Thank you for answering! The thing is that I live in Sweden and I
have not planned to buy anything from the US until after
summer.. But I Can buy both Bosch and MSD right here in
Stockholm. Ive´already changed wires, plugs, rotor and cap the
only things I have left is coil and cap. Can you recomend any
Bosch for me I woulb be really happy!


/Marcus



[Moderator snip]



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/