[DML] Hi !! starting problems

["delorean6584" <carburateur100gaz@xxxxxxx>]

Hi i'm new in here so ill present myself : im from canada, quebec 
and just bought a delorean 1981 3months ago...but now i have big 
problem and really need help !!! here it is : its winter now so i 
put the delorean in the garage and started tune up it a bit...the 
problem began when i changed the distributor/plugs wires....i 
removed the air/fuel unit and change them....the car never start 
good since then...i make many test to find the problem but summer is 
coming and begins to get rid off that engine bay and unburned gas 
all that stuff... so, i removed the air/fuel mixture unit to be sure 
that the big vacuum hose from the idle speed regulator was correctly 
plugged, it was, i réinstall all the stuff, check all other vacuum 
lines, all is ok, i loose the bolt for the throttle plate to be sure 
they were 100% closed, now it start, runs at 2000rpm for about 3-
4secs, drop to about 700-800 rpm but have a VERY ROUGH IDLE, i must 
play with airflow sensor plate and accelerator cable to keep the 
engine running, after 5-6 mins it will run by itself at 800rpm, i 
also tried to bypass the thermistor for idling ecu : put a jumper 
between pin 9 and 11 on the ecu plug, no success, now i dont know 
what to check... is the sensor plate can be adjusted ? 

but i must specify here that the car was working fine before !!

thanks
yan




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/