[DML] Re: Hazard lights switch

["Welmoed" <welmoedj@xxxxxxxxx>]

--- In dmcnews@xxxxxxxxxxxxxxx, "rgalichon" <rgalichon@...> wrote:
>
> Yep, my hazard switch is never illuminated.  Looks like I need a new bulb.
> 
> To install: do I just pull the hazard switch straight out of the dash, change the led within the switch itself, and plug the switch back in?  Or is it more complicated than that?  
> 
> Thanks again!!
>
Not complicated at all: remove the push button's cap and blue screen beneath it.
Put in whatever you're going to use: buld or LED (I propose using a LED - less heat). In the latter case however you will need to modify the LED's contact legs. One of each need to be cut a little less than halfway (keeping the fixed contact end).
Otherwise you keep blowing fuses!

Welmoed.



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/