 
Re: [DML] Pulling Transmission
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Pulling Transmission
- From: "Steven L. Alves" <steve@xxxxxxxxxx>
- Date: Wed, 28 May 2008 09:48:59 -0400
I think the 17mm are holding the bell housing to the transmission across the bottom. From what everyone says I think the 11mm that I am looking for are farther back between the frame. I am off this weekend and plan on getting under there again and finishing this thing. Thanks Martin for the spanner tip. I have some of those but not in 11mm... Looks like I have to go shopping..
Steve
#2700
  ----- Original Message ----- 
  From: Marc Levy 
  To: dmcnews@xxxxxxxxxxxxxxx ; steve@xxxxxxxxxx 
  Sent: Tuesday, May 27, 2008 10:01 PM
  Subject: Re: [DML] Pulling Transmission
  17mm? I don't think that is even possible! They are
  small, 10 or 11mm.
  The bolts are almost impossible to see. As I said,
  you can feel them if you run your finger along the
  front of the bell housing between the back of the
  frame and the transmission.
  I just swapped the trans this past weekend, so my
  memory is very clear on this!! :)
  --- Steven Alves <steve@xxxxxxxxxx> wrote:
  > Thanks, I received a few replies off list also and
  > have located the side 
  > cover. The bottom cover has me stumped. I found four
  > bolts on the bottom but 
  > they were 17mm and look like they connect the bell
  > housing to the tranny. I 
  > am guessing the ones I need to remove are somewhere
  > above the bottom frame 
  > crossover. I need to get a better look. Nothing like
  > laying on your back 
  > with jack stands holding the car up.
  > 
  > 
  > Steve
  > #2700
  > 
  > 
  > ----- Original Message ----- 
  > From: "Tom Neiland" <tneiland@xxxxxxxxxxx>
  > To: <dmcnews@xxxxxxxxxxxxxxx>
  > Sent: Sunday, May 25, 2008 7:20 PM
  > Subject: RE: [DML] Pulling Transmission
  > 
  > 
  > 
  [mod snip]
   
[Non-text portions of this message have been removed]
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
    Individual Email | Traditional
<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)
<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN