[DML] Re: Warm Start Issue

["bitsyncmater" <david.mckeen@xxxxxxxxxxxx>]

I will check the thermal time switch.  I'm working in the VOD now so 
I can put the switch into hot water and test when if opens and 
closes. I thought the temp was 50 or 60 degrees F but I will look it 
up.  If it was below summer temps than it should not be using it in 
the summer.  The no start condition ( 3 hours after shutdown ) does 
not even fire until you crank and pump the gas for 30 to 60 seconds.

After my car is back running I will unplug the cold start valve and 
see if it starts without it.  Has anyone ever tried this?  


--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> 
wrote:
>
> If it starts great cold but not well after 3-4 hours then it could
> still be the thermo-time switch.


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/