 
[DML] Re: Warm Start Issue
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Warm Start Issue
- From: "Harold McElraft" <hmcelraft@xxxxxxx>
- Date: Thu, 07 Feb 2008 02:23:14 -0000
I have experienced this symptom before and it was a fuel leak down 
inside the accumulator. The system showed between 1.0 and 1.5 bar at 
10 min. - I thought "close enough" but, after replacing the fuel 
accumulator, that I suspected was really ok, the fuel pressure was 
2.0 bar after 10 min. That was 15,000 miles ago and so far no more 
hot-start issues.
Before replacement, if I was suffering a hot-start issue I let the 
fuel pump run two or three times at the energizer stage without 
turning over the engine (turn the key to run - then turn off - 
repeated two or three times) in order to achieve full pressure in the 
system and then tried to start the engine it would usually fire right 
up. After replacing the accumulator ? there has been no issues.
The accumulator is not the only no-hot-start cause. The fuel 
distributor has some seals that can go bad - especially if you ever 
had water in the fuel system. Check out Hervey's web site - he has 
pictures and sells the seals too. There is also a check valve in the 
fuel pump.
Harold McElraft - 3354
--- In dmcnews@xxxxxxxxxxxxxxx, "bitsyncmater" <david.mckeen@...> 
wrote:
>
> Getting the rest pressure time is like pulling teeth.  I far exceed
> the 10 min 1.7 bar value.  So if at 20 min if I have zero PSI rest
> pressure are you saying I won't get vapor lock and the car should
> start?
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
    Individual Email | Traditional
<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)
<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN