[DML] Re: Replacing the Fuel Filter Canister, Copper Washers, and the Man Behind the C

["Matthew" <matthew.spittle@xxxxxxxxx>]

Silicone RTV will dissolve with exposure to gasoline.  A better step
is to anneal the copper washers by heating them with a torch until
they're cherry red, and then allowing them to cool.  This will soften
them and allow them to seal.

Matt
#1604


--- In dmcnews@xxxxxxxxxxxxxxx, mike <cambpd@...> wrote:
 
> The summary version of this experience, under the very
> helpful direction of David Teitelbaum, is:  to avoid
> leaks when replacing your fuel filter canister, use
> some silicon sealant (I used Permatex RTV Silicon
> Sealant and Adhesive) and lightly coat both sides of
> the banjo bolt copper washers, reassemble the fuel
> filter fittings tightly, and wait at least 20 minutes
> before trying to start the car.  Presto!, no leaks. 
> Thanks David!
>
> Mike
> #5781
> 
>



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/