 
[DML] Re: Electrical Gremlins
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Electrical Gremlins
- From: "therealdmcvegas" <dmcvegas@xxxxxxxxx>
- Date: Thu, 30 Aug 2007 23:40:14 -0000
Quick and dirty answers:
--- In dmcnews@xxxxxxxxxxxxxxx, "geoff_ombao" <geoff_ombao@...> wrote:
<SNIP>
> 1) Does anyone know the proper way to clean a bulb and socket? When
> signaling, my directionals worked only in "fast blink" mode. I
> replaced the rear boards/bulbs, and cleaned the front bulbs and
> sockets with rubbing alcohol. Now they all blink fine, but the left
> front parking light is out. I think  that the connection isn't clean
> enough.
Just pick yourself up a Lightsocket Cleaning Brush. You can find them 
in any automotive parts store, and should only set you back $2-$3. 
It'll look simular to this:
http://www.mytoolstore.com/kd/139.gif
A good mixture of 50% Rubbing Alcohol and 50% distilled water will 
make a good solution to clean electrial connections (water won't 
evaporate as fast, so it'll wash the grime out of your way). Aside 
from a good wire brush & light sandpaper, a pink pencil eraser will 
work wonders too. Especially on areas like circuit boards where you 
want to be gentle.
 
> 2) The reverse lights are inoperative. Since I installed new
> boards/bulbs, I think it must be the revers light switch. I searched
> the shop manual, but can't find its location. Any suggestions?
Part # 106332. You'll see it on page 4-1-1 of your parts catalogue. 
Just unplug the wires, screw the thing in with a wrench and you're 
done. Located on the drivers side of the trans, and it has a rubber 
boot that covers the electrical connections. Assuming that this is a 
5-Speed? In any case you can always insert a wire jumper to make sure 
the lights do work before ordering any parts.
-Robert
vin 6585 "X"
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
    Individual Email | Traditional
<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)
<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN