 
[DML] Re: Idle too high, but kicks down when I tap the gas pedal
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Idle too high, but kicks down when I tap the gas pedal
- From: "sweetp01569" <paul.sweet@xxxxxxxxxxxx>
- Date: Tue, 21 Aug 2007 11:01:37 -0000
Thanks David.
How do I properly lube the throttle spool?  Spray WD-40 within it?
Paul
--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> 
wrote:
>
> This kind of symptom will usually be caused by a misadjusted idle
> micro and/or looseness (play) in the quadrant link connecting the
> throttle spool to the throttle arm. Even with play in the link you 
can
> usually adjust it so it positively sets the idle micro. I also
> recommend cleaning and lubricating the throttle spool and the 
throttle
> cable. After 25 years it may be time to clean and relube! Don't 
forget
> to see if the carpet or the floor mat is interfering with the 
pedal.
> The idle is supposed to be 775 = - 50 RPM's. So even at idle you 
are
> not idling right @ 1,000 RPM's. Check that the 3 brass screws are
> lightly closed. Use a meter to verify that the idle micro is being 
set
> and is not defective.
> David Teitelbaum
> vin 10757 
> 
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "sweetp01569" <paul.sweet@> wrote:
> >
> > Lately (over the past week or so) when I come to a stop while 
driving 
> > the car, the idle is hanging around 2000 rpms.  However, if I 
tap the 
> > gas pedal, it kicks back down to around 1000.  Is this the idle 
speed 
> > microswitch possibly not engaging properly?  
> > 
> > Thanks,
> > 
> > Paul
> >
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
    Individual Email | Traditional
<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)
<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN