 
[DML] Alternator Issues
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Alternator Issues
- From: "Rick Heile" <rick.heile@xxxxxx>
- Date: Sat, 29 Jul 2006 01:45:46 -0000
I can't believe I have this much bad luck or the vendors I am buying 
my alternators from are selling me bad units. Here is my problem: 
when I first got my D the bearings on the alternator were screaming, 
so I knew I needed to replace it. Since I was putting a rather large 
sound system in it I decided to replace it with a big capacity unit. 
I had it installed by a Delorean mechanic so I know it was installed 
correctly. After less than 3000 miles the bearings on this unit 
literally blew out of the alternator.  This was after all of the 
talk about how large of an alternator you should have in the car so 
I replaced it with a new 110 Amp unit. This lasted less than 600 
miles before the bearings went.
I noticed that I do not have the cone shaped pulley on the front of 
the water pump but one that bolts on that has two pulley grooves ( I 
am running on the inside groove.). My mechanic says that I should 
get a standard Volvo alternator to avoid this problem. What do all 
of you think?
Thank you,
Rick
3290
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN