 
Re: [DML] Orifice Tube
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Orifice Tube
- From: "sweetp01569" <paul.sweet@xxxxxxxxxxxx>
- Date: Fri, 07 Jul 2006 00:46:47 -0000
I'll reply to my own message. I ended up taking out the evaporator by 
the book, and removed center console, glove box, kneepad, etc.  Took 
out the entire heater/AC box.  What a bitch job that is!  I hope I 
can remember and backtrack my steps to get it all back together again.
Paul
--- In dmcnews@xxxxxxxxxxxxxxx, "sweetp01569" <paul.sweet@...> wrote:
>
> Replying to an old post.  I, too had trouble with my orifice tube 
> stuck in the pipe.  I drilled it out, but with it, a hole through 
> through the avaporator tube as well!  I just ordered a new 
> evaporator.  Can anyone piont me to some good step by step 
> instructions for replacing the evaporator?  I got eight of the 
eleven 
> casing screws out.  Any tips in dropping the evaporator out?
> 
> Thanks,
> Paul
> 
>[moderator snip]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN