 
[DML] Re: Right Vent Hose Routing
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Right Vent Hose Routing
- From: "Mike Bosworth" <mike.bosworth@xxxxxxxxxxxxxx>
- Date: Tue, 30 May 2006 10:42:19 -0000
There are suposed to be a couple of retaining clips under there that 
the hosing fixs into, however i dont think your hosing is origional 
either hence it hanging down more than it should.
Regards
Mike
#2001
--- In dmcnews@xxxxxxxxxxxxxxx, Wayne Wagner <dmc-2447@...> wrote:
>
> Question about the routing...
> 
> The vent hose (going to right door vent) fell off from it's left 
side 
> recently, and I finally got around to re-attaching it.  It seems 
to hang 
> rather low... I don't remember this hanging a low as it is. 
> 
> Picture---> http://tinyurl.com/nbxkw
> 
> Is it supposed to be tucked directly behind the knee pad roll to 
where 
> it not really visible or is it supposed to hang just below and 
forward 
> of the knee roll? 
> 
> Thanks.
> 
> -Wayne / VIN2447
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN