Re: [DML] Hood Hinges

["Marv Hein" <marvhein@xxxxxxxxxxx>]

One side of my hood sits properly near the fascia and the other side 
is high.  The high side is about 1/4" off.

Turns out the stainless panel has come loose from the underlaying 
hood structure on the high side.  I can press it down and it's 
properly in position.

Now I just need some way to reattach it.  Super Glue clamped 
overnight only held for a very short time.

Is your panel loose at the front?

Marv
#10820
AZ-D


--- In dmcnews@xxxxxxxxxxxxxxx, Steve Stankiewicz 
<protodelorean@...> wrote:
>
> Anybody know if you can accidentally install our hood
> hinges upside down?  It's on and closes, but the hood
> sits about 1/2" higher than the fenders in the front. 
> I would assume I just need to adjust it, but I don't
> remember there being that much room in the mounting
> holes.  Anybody ever seen this?
> 
> Steve
> 
> VIN 2650 ("Project Delorean")
> www.projectdelorean.com
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com
>










To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/