[DML] The first "proper" twin turbo DeLorean PRV since Legend

[Martin Gutkowski - DMC Ltd <martin@xxxxxxxxxxxxxx>]

Hi All

What with all this recent talk about engine mods, I thought I'd share a 
couple of random, and fairly poor photos I took today of an engine I'm 
working on with a friend (not for a customer :-)

It -was- an Island twin turbo DeLorean engine from auto #2727 which is 
getting a 5-speed conversion as well as this engine. I have fitted the 
crank, pistons and one head from a 2458cc Renault 25 turbo. The cam in 
the other head is off being machined to fit the distributor drive from a 
3 litre Renault Safrane engine so it can go at the "wrong" end of the 
head, so that head is still waiting to go on. It isn't pretty as this is 
in the realms of experimentation and general curiosity but the heads 
have been faced, the (sodium cooled) valves are all clean and re-lapped 
(hands still sore) with new stem seals, all new shells, seals and rings 
on the pistons. All the shiny bits are on the inside, basically! Damn 
it'll go well on a bar of boost :-) I'm using the bellhousing from a 25 
turbo (identical apart from trigger sensor mount - ain't ebay great), 
the gearset from a donor DeLorean gearbox, built in to a Renault 30 
casing. 25 turbo clutch (stronger), I'm using the flywheel from a 25 
turbo with the trigger ring slightly modified to suit a configurable 
aftermarket ECU (why oh why did Renault pick such a stupid trigger 
pattern?!). Exhaust will be 100% Island setup, the intake pipework will 
be custom with twin intercoolers where the exhaust muffler isn't, dump 
valve and a couple of simple cone filters on the turbo intakes, ducted 
from inside the pontoons. Compression ratio is 8:1 and this is achieved 
in the heads, not by the pistons. At first glance, they look exactly the 
same as DeLorean ones, but you can see the blocked off unused 
distributor port and the un-machined drive on the camshaft. We had a 
nightmare of a time putting the pistons in and I suspect the conrods 
were ever-so-slightly out of true because I ended up re-fitting the rods 
from a 24v 3 litre Citroen PRV (identical) which fit perfectly. Praise 
be to the PRV god that made all even-fire gudgeon pins fully floating! 
Intake manifold, throttle body, injector rails etc, all 25 turbo, with 
the injectors themselves being Alpine A610/ Safrane bi-turbo as they're 
really cheap from Renault at the moment, for some odd reason.

http://www.delorean.co.uk/DSCN2196.JPG
http://www.delorean.co.uk/DSCN2198.JPG
http://www.delorean.co.uk/DSCN2199.JPG

I might do DeLoreans for a living, but this stuff is still fun to me :-)

Martin
DMC Ltd
www.delorean.co.uk





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/