[DML] Turn Signal Snapback function

["seanhagan" <seanhagan@xxxxxxxxx>]

I recently had to replace the turn signal appratus, as the wiperswitch 
control arm had been broken. I purchased a new setup from one of the 
vendors along with the lower portion of the steering column, and have 
found that when I put back on the wheel, (it was off by about 20 
degrees at the time) that the snapback function did not function. I 
thought that this was normal, although now that I look back it used to 
work. Initially I thought it was due to the fact that the steering 
wheel was off at the time. I pulled the steering wheel again, and 
straightened it out (now I am only off by about 5 degrees now) Did I 
miss something when I put the turnsignal/wiper control arm appratus 
on? I did not have any leftover parts when complete. Is there 
something I need to hook to the steering wheel itself? 

Thanks
Sean







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/