[DML] Cooling Fan Fail Light Mod

["Marty Galbreath" <marty@xxxxxxxxxxxxxx>]

Here is a quick tip for the cooling fan fail light...If you have a 
jumper or fan relay fix that causes the Cooling Fan Fail light to 
operate during the fan operation as I have, you may want to modify 
the AC panel so that it just says COOLING during the fan's 
operation. Some have placed tape over the words Fan Fail. I was not 
happy seeing the tape on the front of the panel, so here's what I 
did...

Remove the panel. With a sharp Exacto knife or a single edged razor 
blade (as I used) carefully, gently, cut between the laminate 
overlay and the plastic back plate. You are creating a pocket under 
the words Fan Fail. Take two 1 inch pieces of electrical tape and 
stick them back to back. Now cut this down to fit in the pocket you 
made in the laminate. Hold it to the light and adjust as necessary 
until you have covered up the FAN FAIL words. Trim or fold down the 
excess tape and put a small dab of glue on the bottom edge to hold 
it in place.

Reinstall in the console and rejoice every time the word COOLING 
lights up!

Marty Galbreath
#3765






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/