 
Re: [DML] Wacky Tach
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Wacky Tach
- From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
- Date: Fri, 08 Jul 2005 21:21:16 +0100
Check your battery terminals are tight. Mine did this and that was the 
problem
Martin
ironranger7012 wrote:
>I posted this message a couple of weeks ago with no response.  After 
>just reading Jasons message about his tach going past redline may be 
>our problems are similar.
>In my case the tach reads ok at idle to about 2.5k and then starts 
>going wild.  At about 65mph the reading is about 5k and wavering +/- 
>200 rpm.  The original tach did the same until it went around and the 
>needle just pointed down and waved a little while the engine was 
>running. I bought a new tach but it does the same as the first but at 
>about 1k less rpm.  I have just put up with it but I don't want this 
>to go over the top and have to buy a new tach again.  I was thinking 
>it may be the ground for the tach but I'm feeling too old to maneuver 
>under the dash anymore for something that may or may not be my problem.
>I hope someone else out there has a cure for this and/or Jasons.
>
>Vic
>7012 
>  
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN