 
[DML] Re: PRV Performance - Set me straight please
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: PRV Performance - Set me straight please
- From: "Rick" <rdevaux@xxxxxxxxx>
- Date: Sun, 06 Mar 2005 01:29:40 -0000
Gary, The mods I'm going to do are changing my CPR to one that has 
vacuum enrichment, replace my ign distributor with a B28E distributor 
which eliminates the delay solenoid set up, higher compression 
pistons, head porting, B28E cams and headers with a 2.5 inch hi-flo 
exhaust without a cat.  I just want to take what the basic B28 could 
be without going "exotic".  No turbo, no Megasquirt, I want to keep 
it as basic as possible.  I thought the B28E cams and pistons would 
be a good start, keeping the engine stock and dependable.  I also 
want to keep the K-Jet so that when problems with the fuel system do 
develop, they'll be reasonable to deal with.  My engine is rated the 
same as the Delorean, 130 hp.  How are folks, DMUK and DMCH, getting 
their hp boosts from 130 to 150-190?  Are there rising-rate pressure 
regulators available that could be considered?  Thanks very much, Rick
> Good choice. Those who tout open loop or carburation claim their 
cars
> run great but they're going by the seat of their pants. If they 
drove
> around with some metrology (a gas analyzer, wide band O2S, or even a
> cheap A/F meter running in open loop) they'd soon see how poorly the
> basic K Jet (or worse, a carb) meters fuel. And every time the 
mixture
> deviates outside a narrow range they're losing performance. Not to
> mention the pollution and wasted fuel. Such setups are anachronisims
> of the automotive world best reserved for those unwilling or unable 
to
> learn the very real benefits from not using them.
> 
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links
<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
 Back to the Home of PROJECT VIXEN
 Back to the Home of PROJECT VIXEN