[DML] Re: EPOXY COATING ON FRAMES

["painterdave72" <painterdave72@xxxxxxxxx>]

--- In dmcnews@xxxxxxxxxxxxxxx, "Carl Davis" <carldavis@xxxx> wrote:
> 
> 
> 
>  Hello, I was wondering if there was a problem with applying POR-14, type 
>  product directly over good epoxy?   I have sections of my frame that the 
> epoxy appears to be in good condition, but there are small sections where 
>  its starting to chip/flake off, I was wondering about coating the frame 
>  with the POR-14, and wanted to see if the epoxy would have to be removed 
> first. Thanks for any info.

Het I did that to my frame cause it had a few small bad spots and it works 
great .. u just have to sand the epoxy a little to scuff it up and then put the por 
15 on.. Dave..vin 15275








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/