In a message dated 1/10/04 11:02:19 AM Eastern Standard Time,
john_podlewski@xxxx writes:
but it only goes into reverse about 30% of the time (ALOT OF FORCE) 
when it
does not go into reverse it behaves as it is in 2nd gear, because I 
guess it
is!
I had a heck of a time shifting into reverse until I realized I needed 
to 1)
move the shifter left as far as it would go, 2) THEN lift, 3) move the 
last
bit to the left then pull back into the reverse gear position. 
Lifting it while
starting from the neutral position just doesn't seem to work. The 
prior
owner of my car told me, (before I figured this out,) that he used 
both hands to
lift it while shifting into reverse! Not necessary if you go left as 
far as
you can before lifting. :) It doesn't look that way on the shifter 
knob
diagram, but as I recall, the diagram in the manual does show the need 
to lift. Still
necessary to go left as far as possible first, though it doesn't look 
that
way in the manual. If that doesn't get it, ease the clutch out in 
neutral for a
second, then try again. Of course, I assume you realize that on the
DeLorean, when the gear selector is in the neutral position, pushing 
it straight ahead
is 3rd. You have to spring it left or right to select gears other 
than 3rd
and 4th. (That gave met a fit during my first test drive,too! It's a 
wonder I
didn't tear up the gears test driving it!))
Wayne
11174
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxx
For more info on the list, tech articles, cars for sale see 
www.dmcnews.com
To search the archives or view files, log in at 
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/